MAKO products provide exact elevation control for concrete slabs and structural members. Our products can be used in a variety of combinations to suit your every job.

The MAKO systems consists of:

  1. MAKO Driver
  2. FinCap Screed Chair
  3. NEW JAWS – small & large
  4. FinStand
  5. Base Plate 4.5
  6. All-Thread
  7. Nut & Washer

FinCap_5MAKO Driver

The MAKO Driver quickly and accurately allows one person to set multiple screed or structural element support locations in seconds. The patented Driver is designed to set the FinCap or JAWS chairs and screed pipe to the finished elevation of concrete by aligning the marker with a string line or laser.

Once the top of the marker aligns with the string line, the screed chair is then set at the proper height to accept a screed rail.

The Driver is made of impact resistant resin. The hand guard protects the contractor when setting locations.

SOG 300x300


The patented, non-metallic MAKO FinCap fits mounting structures from 3/8″ (10 mm) to 5/8″ (16 mm) making it the most versatile screed support chair available.Fins1_600 It will not bounce off your mounting structure because the “fins” inside hug whatever it is mounted on!

The FinCap supports a nominal 1-1/2″ (40 mm) – schedule 40 or higher – galvanized pipe (1.5″ ID/1.9″ OD).  The FinCaps are virtually indestructible and have a 100% no breakage money back guarantee that they will not break, snap or crush under a screed during normal placement conditions.

j-large end view
J-small end view.2_toponly


JAWS Screed Chairs are designed for a variety of screed rail sizes from 1/2″ (12 mm) to 2” (50 mm) and everything in between. Both the JAWS small and large chairs fits mounting structures from 3/8″ (10mm) to 5/8″ (16 mm). The “fins” inside the barrel hug the mounting structure so it will not bounce off during placement.

JAWS is made of impact resistant material and is virtually unbreakable. It can be setup a in various configurations using the FinStand and Base Plate and works on several different applications.

Use the MAKO Driver with the JAWS Screed Chairs to provide accurate setup every time.

FinStandMAKO Finstand_2

The FinStand is made of impact resistant material and is virtually unbreakable. It can be used in a variety of ways on multiple surfaces. The FinStand supports the FinCap or JAWS screed supports with a 1/2″ all-thread. The stand can be adjusted 1.75″ (45 mm) with each rod size to accommodate any variation in the deck. See the chart below for rod size for the desired floor depth.

Slab Depth chart

The FinStand secures to a metal deck using #8 or #10 tek screws or wood deck using nails.

Base Plate 4.5

The Base Plate 4.5 is used with the FinStand to expand the uses of the system to vapor barriers, concrete overlay, rock or sand plus any other type of substrucBase Plate bottom textureture. The FinStand snaps and securely locks into the Base Plate. The assembly can be secured into place either by using screws, nails, construction glue or other adhesives.

The Base Plate is made of impact resistant material and is virtually unbreakable. The bottom of the Base Plate is textured to easily grip adhesives for extra staying power. It also provides a suitable surface for patching when used in tilt-up applications.IMG_0101

The stay-in-place form can be easily setup by inserting a 1/2″ (13 mm) rod between the bottom of the FinStand and Base Plate 4.5.